iFlight SucceX 60A Plus 32bit BL Dshot1200 4in1 ESC was designed to give your motors smooth power with great stability and durability. The 32bit 48mHz 3-IN 1 STM32F051 MCU, Metal MOSFET, TDK MLCC Low ESR ceramic capacitors provide high efficiency and better heat dissipation.
Standard 30.5*30.5 Φ4mm mounting holes; Vibration and impact can be perfectly avoided by adding dampers; Rational layout design with extended solder pads ensures easy fixes or adjustments; Countersunk holes on the soldering pad enable each layer board can be powered.
Excellent hardware, optimized circuit, and high-performance components enable SucceX 60A Plus 4in1 ESC to respond efficiently. All in all, it brings faster-responding speed and smoother flying experience!
- 10 layers double-board stacking PCB board;
- 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;
- 32bit FO51K86 MCU,48mHz running speed;
- TDK MLCC Low ESR ceramic capacitors;
- Top grade metal MOSFET;
- Rational layout, countersunk holes on extended motor soldering pad enable each layer board can be powered.
- Dimension: 38*36mm
- Mounting Holes: 30.5*30.5mm/Φ4mm
- Supports 2-6S lipo input
- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
- Current sensor: Yes
- BEC: No
- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
- Target: iFlight-BL32-4IN1
iFlight SucceX 50A V2 Slick ESC is specially designed for FPV racing frames with slim arms like Dove, Dove Lite, Archer. It comes with 48MHZ 32-bit STM32F051, to provide faster response speed and processing capacity. The STM32F051 is combined with the high-performance 3-in-1 driver, to lower the signal delay from throttle to the receiver, accelerate the motor responding speed and increase the control precision.iFlight SucceX 50A V2 Slick ESC provides the advantages of rapid flight and extraordinary flight experience!
- 48MHZ running speed integrated 3 in 1 STM32F051;
- Total 8-layer PCB board;
- High temperature and high current resistance;
- Support telemetry & current sensor ;
- RGB LED for power- on display;
- 45*8mm dimension, perfect for FPV racing frames w/ slim arms.
- countersinks and semicircle orifices enable each layer to be energized after power-on
- Support Dshot150/300/600/1200/Multishot/Oneshot;
- More aerodynamic, less prop thrust disturbance
- Input Voltage: 2-6S
- Weight: 3.9g without cables
- Dimension: 45*8mm
- Current sensor: support
- Telemetry: support
- RGB led lights display status
- BEC: NO
- Support: Dshot150/300/600/1200, MultiShot, OneShot;
- No additional capacitor needed up to 5S!
- But to encounter back EMF and ensure the longevity of your electronics, min. 220uF Cap 35V for 4-5S, 50V for 6S on your main lead!
- SucceX 50A V2 Slick ESC *1pcs
- 35V 220uf capacitor * 1pcs
- Power cables & ESC signal wires *1set
Buy a SET of 4 SucceX Slick V2 ESC's you get a BOX of 4 pcs