AKK Tek


AKK FX2 Ultimate 5.8 Ghz 25mW-1200mW VTX

AKK FX2-ultimate 5.8GHz VTX Support OSD Configuring Upgraded Long Range Version.

 

Key features:
• Support Smart audio 
• 25mW/200mW/600mW/1200mW power switchable
• One button frequency and power setup
• OSD configuration using smart audio
• 7-26V input with 5V output 
• With MIC

Package includes: 

• 5.8Ghz 25mW/200mW/600mW/1200mW Switchable FPV Transmitter

 

• Antenna(MMCX to SMA) and cable set
• Product manual
AKK FX2 Ultimate 5.8 Ghz 25mW-1200mW VTX

€ 24,50

  • Op Voorraad
  • Levertijd: 1-3 dagen1

AKK X2 Ultimate 5.8 Ghz 25mW-1200mW VTX

AKK X2-ultimate 5.8GHz VTX Support OSD Configuring Upgraded Long Range Version

 

Key features:
• Support Smart audio 
• 25mW/200mW/600mW/1200mW power switchable
• One button frequency and power setup
• OSD configuration using smart audio
• 7-26V input with 5V output for camera
• With MIC

Package includes: 

• 5.8Ghz 25mW/200mW/600mW/1200mW Switchable FPV Transmitter

 

• Antenna(MMCX to SMA) and cable set
• Product manual
AKK X2 Ultimate 5.8 Ghz 25mW-1200mW VTX

€ 23,50

  • Uitverkocht

AKK Nano 3 VTX (Smart audio) Special for Runcam/Foxeer micro

AKK Nano 3 5.8GHz 25/200mW Switchable VTX 

FEATURES
  • Support Pit Mode
  • 25mW and 200mW power switchable
  • One button frequency and power setup
  • OSD configuration via smart audio
  • 5V to camera @ under 300mA
  • Can be mounted to RunCam Micro camera's! (those that support mounting pattern shown)

 



SPECIFICATIONS
  • Input voltage: 3.2-5.5V
  • Antenna connector: IPEX
  • Cable connector: 6pin
  • Dimension(without mounting hole): 19*19mm
  • Weight: 2.3g
  • Smart Audio

 

 

 

AKK Nano 3 VTX (Smart audio) Special for Runcam/Foxeer micro

€ 14,95

  • Op Voorraad
  • Levertijd: 1-3 dagen1

AKK FX2 5.8Ghz 40CH 25mW/200mW/500mW/800mW FPV Transmitter OSD

Enhanced heat dissipation, Lower current than other branded vtx , Higher power consumption available for long range flying(up to 5KM), Lc filter gurantee a clean video, One cool feature about this VTX is that you can mount it on top of your FC/PDB stack thanks to the 30x30mm mounting pattern.

Key features:
Support Parameter-adjusting mode
25mW, 200mW, 500mW and 800mW power switchable
One button frequency and power setup
OSD configuration using FC Uart
7-24V input with 5V output 
With MIC

Button control Channel select mode:
Channel select mode

Band select mode

Power select mode


Package included: 

1 x 5.8Ghz 40CH 25mW/200mW/500mW/800mW Switchable FPV Transmitter
1x Antenna and cable set
1x Product manual 
 

 

AKKTEK FX2 5.8Ghz 40CH 25mW/200mW/500mW/800mW FPV Transmitter OSD

€ 20,50

  • Uitverkocht

Commentaren: 0