Hypetrain


Hypetrain 'Le Drib' 2306 2650KV V2

 

 

De Hypetrain 'Le Drib' 2306 2650KV V2 motor.

 

SPECIFICATIONS

  • Kv: 2650
  • Stator diameter: 23 mm
  • Stator height: 6 mm
  • Weight: 30 grams
  • Wire Length: 118 mm
  • Shaft size: M5
  • Mounting Screw Pattern: 16×16 mm
  • Input Voltage: 3-5S

INCLUDES

  • 1x Hypetrain Le Drib 2306 2650kv Motor
  • 1x M5 Nylock Propeller Nut
  • 4x M3 Mounting Screws
Hypetrain 'Le Drib' 2306 2650KV V2

€ 24,50

  • Op Voorraad
  • Levertijd: 1-3 dagen1

Hypetrain Acro 2207 2450kv Motor V1.0

Na het succes van de originele Hypetrain FREESTYLE-motor, 

zijn we trots om een nieuwe vlaggenschipmotor, de Hypetrain ACRO, te lanceren.

Deze motor heeft dezelfde 2450 KV-Rating van de FREESTYLE, waarvan is bewezen dat deze zorgt voor een goed vermogen en efficiëntie.

De grootte van de stator is echter nieuw.

De grootte van de 2207-stator is bedoeld om een scherpe vermogenscurve en meer stuwkracht aan Top end Trust.

De bel heeft een herzien ontwerp. Het onderhoudt het iconische Tri-spoke Design geïnspireerd op het Rotor Riot-logo. De buitenlip is verdikt om de belring te helpen versterken tegen deuken tijdens crash impact.

Dit DURA-BELL-ontwerp zal zorgen voor een soepele rotatie, zelfs na het bando bashing.

Een ander kenmerk dat bedoeld is om de duurzaamheid te verbeteren,

is het gebruik van multi-strand wikkelingen op de stator.

Meeraderige wikkelingen zijn minder snel beschadigd als er een zware val plaatsvindt

waarbij de arm is gebroken en de motordraden worden getrokken.

Dit zal uw kansen verbeteren om de stator opnieuw te kunnen gebruiken, zelfs als de bel beschadigd is.

Zoals alle Hypetrain-motoren is de bel eenvoudig te verwijderen via een M2-asschroef met een 2 mm zeskantkop om strippen te voorkomen. In vergelijking met een c-clip vergemakkelijkt deze asschroef het onderhoud en de reiniging. De "open onderkant" -stijl zorgt voor een aanzienlijke gewichtsvermindering en verbeterde koeling. Het bevestigingsschroefpatroon van 16x16 mm opent nieuwe ontwerpmogelijkheden, terwijl backwards compatibiliteit met oudere frames behouden blijft.

 

Specs:

 

  • Stator height: 7 mm
  • Kv: 2450
  • Bearings: EZO
  • Weight:
  • Wire Length: 118 mm
  • Shaft size: M5
  • Mounting Screw Pattern: 16x16 mm
  • Input Voltage: 3-6S

INCLUDES

  • 1x Hypetrain Acro 2207 2450kv Motor V1.0 - EZO
  • 1x M5 Nylock Propeller Nut
  • 4x M3 Mounting Screws
Hypetrain Acro 2207 2450kv Motor V1.0

€ 23,50

  • Op Voorraad
  • Levertijd: 1-3 dagen1

Hypetrain Brat 1407 4140kv Special! (4 Motors)+ FREE SET OF PROPS(HQ 3x3x3xt)

 

 

 

Hypetrain Brat 1407 4140KV ( 4 Motors) + FREE SET OF PROPS(HQ 3x3x3xt)

De eerste "grotere" 3" motor, ontworpen voor 'Cinematic Smoothness', met nog steeds een goede verhouding tussen efficientie en vermogen speciaal gemaakt voor het ACROBRAT FRAME.

Deze motor heeft de hoogste prioriteit bij het leveren van de meest vloeiende werking van elke 1407 op de markt.

Minder trillingen betekent minder "ruis" voor uw flightcontroller.

"Minder" ruis betekent betere prestaties en betere efficiëntie.

Belangrijker is dat minder "ruis" betekent minder jello voor uw CMOS-camera (dwz - de Runcam Split Mini)!

 

Specs:
  • KV: 4140
  • Bearings: MR52ZZ-NSK
  • Stator diameter: 14mm
  • Stator height: 7mm
  • Weight: 13.3 g(including the wire)
  • Wire length: 24(gauge) 100mm
  • Shaft size: 2mm
  • Mounting screw pattern: 12mm
  • Input Voltage: 2s-4S                   
  • Magnet: N42 Series

4x Hypetrain Brat 1407 4140kv Special!

1x HQ Tmount T3x3x3 props

Hypetrain Brat 1407 4140kv Special! (4 Motors)+ FREE SET OF PROPS(HQ 3x3x3xt)

€ 54,50

  • Uitverkocht

Hypetrain Grinders 2306 2450KV Motor

SPECIFICATIONS

  • Kv: 2450
  • Stator diameter: 23 mm
  • Stator height: 6 mm
  • Weight: – grams
  • Wire Length: – mm
  • Shaft size: M5
  • Mounting Screw Pattern: 16×16 mm
  • Input Voltage: 3-5S

INCLUDES

  • 1x Hypetrain Grinders 2306 2450kv Motor
  • 1x M5 Nylock Propeller Nut
  • 4x M3 Motor Screws
Hypetrain Grinders 2306 2450KV Motor

€ 18,95

  • Op Voorraad
  • Levertijd: 1-3 dagen1

Hypetrain EZO Ummagawd 2306 2150KV v1.1

The Hypetrain Ummagawd Motor is an Official Rotor Riot product, designed with direct input from Professional Pilot "Ummagawd" Tommy Tibajia.

But has better EZO Bearings with 118mm wires.

Designed from the ground up with constant input from Tommy "Ummagawd" Tibajia, the attention to detail of the Hypetrain Ummagawd Motor sets it apart from the competition. Inspired by the iconic Rotor Riot logo, the Hypetrain’s three-spoke 7075 aluminum bell showcases the elegant silver coated wire wound over the orange stator. We love stylish design - but performance is the priority.

That’s why we thoroughly considered every aesthetic decision, to ensure that it would not negatively impact the performance of the motor. And just to be extra sure, every motor gets individually tested before it leaves the factory! This guarantees that each motor will not only look nice, but also perform well! The “open bottom” style base allows for considerable weight reduction and improved cooling, and the revolutionary 16x16 mm mounting screw pattern opens up new design possibilities while still maintaining backwards compatibility with legacy frames. Moreover, we wanted it to have a set screw to hold the bell rather than a C-clip, to facilitate motor cleaning and maintenance! 

SPECIFICATIONS 
Kv: 2150 
Stator diameter 23 mm
Stator height: 6 mm
Weight: 30 grams
Wire Length: 118 mm
Shaft size: M5
Mounting Screw Pattern: 16x16 mm
Input Voltage: 3-5S 

INCLUDES 
1x Hypetrain Ummagawd 2306 2150kv Motor
1x M5 Nylock Propeller Nut
4x M3 Mounting Screws

Hypetrain EZO Ummagawd 2306 2150KV v1.1

€ 22,95

  • Uitverkocht

Hypetrain EZO 'Le Drib' 2306 2650KV Motor

The Hypetrain Le Drib Motor is an Official Rotor Riot product, designed with direct input from Professional Pilot "Le Drib" Drew Camden.

Designed from the ground up with constant input from Drew "Drib" Camden, the attention to detail of the Hypetrain Le Drib Motor sets it apart from the competition. Inspired by the iconic Rotor Riot logo, the Hypetrain’s three-spoke 7075 aluminum bell showcases the elegant silver coated wire wound over the orange stator. 

We love stylish design - but performance is the priority. That’s why we thoroughly considered every aesthetic decision, to ensure that it would not negatively impact the performance of the motor. And just to be extra sure, every motor gets individually tested before it leaves the factory! This guarantees that each motor will not only look nice, but also perform well!

The “open bottom” style base allows for considerable weight reduction and improved cooling, and the revolutionary 16x16 mm mounting screw pattern opens up new design possibilities while still maintaining backwards compatibility with legacy frames. Moreover, we wanted it to have a set screw to hold the bell rather than a C-clip, to facilitate motor cleaning and maintenance!

 

SPECIFICATIONS

 

With EZO BEARINGS(nieuw).

  • Kv: 2650

  • Stator diameter: 23 mm

  • Stator height: 6 mm

  • Weight: 30 grams

  • Wire Length: 118 mm(nieuw)

  • Shaft size: M5

  • Mounting Screw Pattern: 16x16 mm

  • Input Voltage: 3-5S

INCLUDES

  • 1x Hypetrain Le Drib 2306 2650kv Motor

  • 1x M5 Nylock Propeller Nut

  • 4x M3 Mounting Screws

Hypetrain 'Le Drib' 2306 2650KV Motor

€ 22,50

  • Op Voorraad
  • Levertijd: 1-3 dagen1

Hypetrain Freestyle 2306 2450KV- EZO V1.1

Hypetrain V1.1 EZO.

The same bell as v1.1, but has better EZO bearings with 118mm wires.

The Hypetrain Freestyle Motor is the first official product designed by Rotor Riot! Ride the Hype Train with the Hypetrain!
Designed from the ground up with constant input from our best pilots, the attention to detail of the Hypetrain Freestyle motor sets it apart from the competition. Inspired by the iconic Rotor Riot logo, the Hypetrain’s three-spoke 7075 aluminum bell showcases the elegant silver coated wire wound over the orange stator.
We love stylish design - but performance is the priority. That’s why we thoroughly considered every aesthetic decision, to ensure that it would not negatively impact the performance of the motor. And just to be extra sure, every motor gets individually tested before it leaves the factory! This guarantees that each motor will not only look nice, but also perform well!
As far as performance, the Hypetrain Freestyle is built around a 2306 stator, with single strand windings that give it a KV rating of about 2450 RPM per Volt. In other words, plenty of power and good efficiency! To ensure reliability, we opted to use high quality silicone wires for the motor leads.
The “open bottom” style base allows for considerable weight reduction and improved cooling, and the revolutionary 16x16 mm mounting screw pattern opens up new design possibilities while still maintaining backwards compatibility with legacy frames. Moreover, we wanted it to have a set screw to hold the bell rather than a C-clip, to facilitate motor cleaning and maintenance!

SPECIFICATIONS

 

• Kv: 2450

• Stator diameter: 23 mm

• Stator height: 6 mm

• Weight: 30 grams

• Wire Length: 118 mm

• Shaft size: M5

• Mounting Screw Pattern: 16 × 16 mm

• Input Voltage: 3-5S

 

INCLUDES

 

• 1x Hypetrain Freestyle 2306 2450kv Engine

• 1x M5 Nylock Propeller Nut

• 4x M3 Mounting Screws

Hypetrain Freestyle 2306 2450KV- EZO V1.1

€ 22,95

  • Uitverkocht

Commentaren: 0